How Many Slabs Do I Need?
Enter your countertop pieces and pick a slab size. We lay the pieces out on the slabs so you can see the count, where seams fall and how much stone is left over.
Slab
Advanced
How this works
Each piece is placed on the slab in rows, largest pieces first, keeping a small margin at the slab's edges and room for the saw cut between pieces. Runs longer than the slab are split with a seam. It's the same idea a fabricator uses when they plan a layout, simplified.
Real fabricators can sometimes do better (fitting small pieces into odd gaps) and sometimes need more (matching veins across a seam, avoiding a flaw in the stone). Treat the answer as a solid starting point, not a final count.
Typical slab sizes
| Material | Typical size | Notes |
|---|---|---|
| Quartz, standard | about 120 × 55 in | Most common quartz size. Brands differ by an inch or two. |
| Quartz, jumbo | about 130 × 65 in | Fewer seams on long runs and deep islands. |
| Granite | roughly 100–130 × 60–80 in | Varies by quarry and slab. Use the real slab's size. |
| Quartzite | roughly 110–130 × 65–80 in | Often large slabs; very hard, so cutting costs more. |
| Marble | roughly 100–125 × 55–75 in | Varies most. Heavy veining may need slabs in sequence to match. |
| Porcelain / sintered stone | about 126 × 63 in (3200 × 1600 mm) | Thin and light; other sizes exist. |
Sizes are typical figures as of November 2026. Always confirm the actual slab size with your supplier.
Worked example
An L-shaped kitchen (110 in and 96 in legs, 25.5 in deep) plus an 84 × 42 in island, on standard quartz (120 × 55 in):
- The L becomes two pieces: 110 × 25.5 and 70.5 × 25.5 (seam at the corner).
- The 42 in deep island fills most of one slab's width by itself.
- The two 25.5 in deep runs stack on a second slab (25.5 + 25.5 + cut fits within 53 in usable).
- Result: 2 slabs. Load the example with "Start over" to see it drawn.
Questions
Why can't I just divide square footage by slab size?
Because pieces have to fit whole (or be seamed), and leftover strips are often too narrow to use. Two 25.5 in deep runs fit side by side on a 55 in slab, but a 42 in island won't share a slab with them.
Where should seams go?
Fabricators avoid seams over dishwashers, at sink and cooktop cut-outs, and in the middle of an island where they're most visible. A jumbo slab can remove a seam on runs between about 118 and 128 in.
What's "yield"?
The share of the slab area that ends up in your countertops. The rest is offcut. Leftover pieces may be big enough for a vanity or a shelf. Ask your fabricator about keeping them.
Does marble or quartzite need more slabs?
Often, yes. Strong veining has to line up across seams, and a "bookmatched" look (two slabs mirrored like an open book) means buying slabs cut one after the other from the same block. Expect the count here to be the minimum, and ask your fabricator about vein matching before you buy.
Do I pay for whole slabs?
Usually, yes, for natural stone you pick at the yard. Some shops price by the square foot and use remnants; ask how they charge.